Compare 3D Printers and 3D Scanners Offers
Best place to find additive manufacturing equipment for beginners and professionals. Compare great value prices or get quotes now.
Filter
Showing 1–30 of 107 results
★★★★★
More details +
PROS:
- The printer has an open platform.
- Its price is affordable.
- Afinia H480 is a good entry-level DIY printer.
- This printer is portable and relatively lightweight.
CONS:
- Printing with this printer requires patience.
- IT has a smaller build area compared to the price at which it comes.
★★★★★
More details +
PROS:
- Automatic bed leveling frees you from time-consuming and labor-intensive leveling tasks.
- Power outage recovery lets you resume printing and recover from exactly where it left off. No worries about unexpected power outages.
- Automatic filament assignment permits you to automatically load and unload the filament with just a click.
- An all-metal frame is built to last with high strength aluminum frame. Enclosed metal unibody design enables a more stable and rigid structure with compact size.
CONS:
- The print quality of Anet ET4 is not reported up to the mark and can be a lot better considering the price range at which it is offered in the market.
- The printer’s open body is a little bit of an issue when it comes to 3D printing with filaments that require it to withstand higher temperatures.
★★★★★
More details +
PROS:
- Delivers good print results.
- Quick to assemble, no previous experience needed.
- Continued 3D printing even after power interruption.
- The print bed heats up quickly.
- Low error rate.
- Relatively fast print speeds.
CONS:
- The filament holder’s position is unfavorable.
- The printer is relatively loud during printing.
- Printing with metal PLA is not possible with Mega S.
- High power consumption.
★★★★★
More details +
PROS:
- Has amazing print quality for the price
- It is easy to use and set up
CONS:
- Manual bed leveling can be a hassle
- The printer has flimsy housing
- You cannot connect with this printer using any kind of network/internet connectivity
★★★★★
More details +
PROS:
- Available at a very affordable cost.
- Comes with a single screw leveling that decreases human effort like no other.
- Low resolution of the printer is covered to a considerable extent with the printer’s Anti-aliasing technology.
- Low power consumption.
- Quick FEP replacement.
- Equipped with important tools that are highly useful in the due course of 3D printing.
- New slicing software makes possible quick slicing of parts and functional prototypes.
CONS:
- Despite the anti-aliasing technology, the printer is only able to provide a resolution of 480 pixels.
- Lesser printing materials.
- Works only with Windows and mac operating systems.
- Leveling of bed becomes a headache as you need to do it every time.
- The Z axis lead screw and linear rail setup doesn’t give the printer same level of stability as the former versions.
★★★★★
More details +
PROS:
- Has a neat design.
- Is capable of heating extremely fast.
- When in operation it does not make much noise.
CONS:
- The filament holder of this printer is very frustrating to deal with.
- You will have to take care of the delicacy of this printer’s wiring.
- Sometimes there is even uneven heat dissipation which leads to print failure.
★★★★★
More details +
PROS:
- Works of different modes.
- Can produce parts with large build volumes.
- Wireless printing.
CONS:
- Closed print chambers are known for giving a difficult time to the user while post-processing.
★★★★★
More details +
PROS:
- Easy to install
- Sleek and trendy design
- Great resolution and accuracy
- Works with Windows, MAC and Linux OS
CONS:
- Expensive
- Occasional software crashes
★★★★★
More details +
PROS:
- It possesses dual extruder
- Multi-color printing is possible
- Metal frame for extra reliability
- Removable glass bed
- Support for multiple filaments
CONS:
- Build space isn’t very large
- Unavailability of automatic bed leveling before the printing starts
★★★★★
More details +
PROS:
- BIQU Kossel Pro features liner rails enabling smooth movement of print head to the bed and back.
- TMC 2100 stepper motors make the overall 3D printing process possible with negligible amount of voice.
- The printer displays very fast print speed. Objects that will hours to print on other printers, will take only an hour on Kossel Pro.
- It offers a large print area.
CONS:
- There are complains about the printer’s stock print cooler.
- PTFE tube way has problems of clogging.
- Stock firmware of the printer should be updated to the community firmware for betterment.
★★★★★
More details +
PROS:
- Overall Witbox 2 is easy to use
- The print quality of this machine is excellent and the fact mentioned in the Print Quality section is that it has fabulous speed
- This 3D printer can print using multi-materials
CONS:
- ou would have to use glue as no heating plate comes with the printer. This increases the overall time that it takes for printing a part after printing one because every time you need to spray the space and apply the glue
★★★★★
More details +
PROS:
- Witbox Go has a filament sensor that will tell you when your 3D printer is out of filaments.
- There is a nozzle clog sensor that will notify you when you need to clean the nozzle.
- You can auto level the bed of this 3D printer at a click and need no manual effort in doing the same.
- A hot end would ensure fast 3D printing of parts and functional prototypes.
- Remote monitoring of the 3D printing process inside this 3D printer is possible using your Smartphone as the printer operates using the Android system.
CONS:
- You need to be extremely careful while dealing with this 3D printer because every aspect of it is very compact and delicate. That's the reason that it demands special attention.
★★★★★
More details +
PROS:
- It operates quietly, hence making a great option for home users
- Saves the print operation during a power outage
- Comes with Wifi connectivity and remote print control features
- You can switch between the mirror and parallel printing modes
- Filament monitoring saves the user from failed prints
CONS:
- Complex slicing software
- Bed leveling is manual and requires skilled hands
- The wider metal panel at the top makes it difficult to gaze at the earliest stages of the prints
★★★★★
More details +
PROS:
- Heated bed
- All metal-design;Sturdy
- Reliable
- High print speed
- High accuracy
- Plug and play design
- Affordable
- Support multiple materials
CONS:
- Only a USB connection is available
- Power outage resume feature isn’t available
★★★★★
More details +
PROS:
- Affordable.
- Silent Driver.
- Filament run-out sensor.
- Print resume feature.
- Capable of printing with different filaments.
- Intuitive user interface.
- Simple construction, easy to assemble.
CONS:
- The user interface is somewhat outdated.
- The noise level of the printer is higher when in operation.
★★★★★
More details +
PROS:
- Automatic bed leveling.
- Simple to use touchpad.
- Compact in size.
- Enclosed print chamber.
- Removable magnetic bed.
- Quiet in operation.
CONS:
- Does not offer a heated print bed.
- Small build volume.
- No in-built camera.
- No filament run-out sensor or print recovery.
★★★★★
More details +
PROS:
- Generous build volume.
- Sturdy cubical frame.
- Good print quality.
- Flatbed for good adhesion.
- BLTouch probe for auto-leveling.
- The assembling process is easy as well as fast.
- Touch screen interface.
- Dual-axis and stepper motors permit stable movements for accurate prints.
CONS:
- Cheap Bowden extruder.
- PSU issues.
- Fans are noisy.
- The hot end is not able to keep up with larger nozzles when maintaining the same speed.
★★★★★
More details +
PROS:
- Reliable.
- Produces solid print quality.
- Affordable.
- Is super quiet in operation.
- Features a Capricorn Bowden tube.
- Comes semi-assembled.
- Hosts a sturdy, cubic build structure delivering an attractive look.
CONS:
- The printer’s bed leveling is tricky.
- Reusing the magnetic bed after cleaning is very difficult.
- Management of wire cables is not proper.
★★★★★
More details +
PROS:
- It offers a pretty large platform
- It has three different extruders
- By ensuring smart settings and design, the printer enhances the ease of use to the next level
- Support for a wide range of filament materials
- Wired as well as wireless connectivity available.
- High printing speed
CONS:
- The 3D printer is costly and isn’t affordable to all
- Few challenges with precision if the settings parameters are not adjusted properly
- Support for only proprietary filaments
★★★★★
More details +
PROS:
- Easy to use
- Compact and affordable
- Fully assembled
- Decent quality prints
- The easy bed leveling process
CONS:
- Runs only with Dremel PLA filament
- Do not provide WIFI connectivity
★★★★★
More details +
PROS:
- Print removal is easy.
- 30 percent faster than 3D40.
- Reliable 3D printing.
CONS:
- Oozing of the filament is a bit of a problem.
★★★★★
More details +
PROS:
- The printer is easy to set up and use
- There is an excellent print quality that the printer produces, whether it’s a part of a functional prototype, regardless of the industry you wish to use it in, it will deliver up to the mark
- The printer sets in front of the world a perfect example of safety and reliability. Often those two are considered counterparts of each other and the printer that has the former lacks the latter. But with Dremel Digilab, the manufacturer has proven that both can be present in almost equal amounts
- 3D45 has a comprehensive ecosystem that is tailored for education
CONS:
- Whenever you are printing in this printer using a third-party filament, you’d notice that the print quality is lower than what it was
- Although it can print with some materials that are advance when you typically turn on to materials like Nylon, the printer starts to show some tantrums
- The closed system that this printer has limited creativity to an extent
★★★★★
More details +
PROS:
- The printer is accurate
- It provides amazing resolution
- Sturdy frame
- Power outage recovery
- Heated build plate
- Affordable
CONS:
- Manual calibration
- Only supports PLA
★★★★★
More details +
PROS:
- Extraordinary print quality.
- Minimal setup required before 3D printing.
- Simple yet effective construction.
CONS:
- USB connection is located at a little odd place.
- The fan’s operation produces a lot of noise.
- Heavy use can trip the printer’s firmware.
★★★★★
More details +
PROS:
- Fast printing and less maintenance.
- Outstanding prints and ultra-accuracy.
- Sturdy build quality.
- Multilingual interface.
- Good warranty and service.
CONS:
- Small build volume.
★★★★★
More details +
PROS:
- Faster part curing
- Decent build space when compared to other desktop resin printers
- Coupled with powerful slicer
- High quality parts
CONS:
- Parts possess a lesser pixel density when compared to its predecessors.
- It is not equipped with a top-down removable vat.
- The cooling fans are louder.
★★★★★
More details +
PROS:
- Comes with dual extruders
- You can connect using USB and micro SD cards
- Allows use of third party filaments
- It is open-sourced
- The print bed is completely removable
- It has a touch screen interface
- Allows printing with various materials
CONS:
- Pro 2 has an open body because of which it can be subjected to danger if kids are around
- The temperature of the atmosphere will affect the overall quality of the print so some complex geometries can not be printed with dimensional accuracy
★★★★★
More details +
PROS:
- Comes with swappable print heads.
- Has a dual extruding system.
- Parts and prototypes of larger volumes can be printed using Felix Pro 3.
- Accommodates a touch screen on its top for monitoring and controlling.
- It comes with multiple options to connect.
CONS:
- The printer has an open body because of which temperature stability is an issue.
- The safety of parts, while they are in the printing process, is also an issue.
★★★★★
More details +
PROS:
- Huge build volume.
- Intuitive touch screen interface.
- Wifi-connectivity.
CONS:
- Enclosed chamber printing.
★★★★★
More details +
PROS:
- Huge Build volume.
- Removable and bendable flexplate.
- Dual extrusion system.
- High-quality surface finish.
- Dimensional accuracy even in intricate parts and functional prototypes.
CONS:
- Enclosed print chamber.
- Post-processing of part is difficult because cooling takes more time than in any open-body 3D printer.
