Supporting single as well as dual extrusion, using Inventure you can print supports and models with the same filament, as well as a print model and water-soluble support structures with different materials too. The printer works with a wide range of external and dedicated materials available on both, smart cartridges and standard spools such as Nylon, ABS, etc.
Although Inventure is a desktop 3D printer, it has features like a dissolvable support system, enclosed printing chamber, and built-in HEPA filter making it nowhere inferior to any industrial 3D printer. The printer can 3D print movable mechanisms in one go. Its heated chamber builds up the right temperature minimizing shrinkage and achieves high dimensional accuracy. The printer also supports third-party filaments in single as well as dual extrusion modes.
The maximum build volume offered by Inventure is 135 mm * 135 mm * 130 mm letting you print parts and functional prototypes in one go. The layer resolution range offered by the printer is 150 to 300 microns. It prints parts with a minimum wall thickness of 450 microns. There is an arrangement available in the printer for automatic leveling of the print bed. Based on LPD, Inventor prints with a nozzle diameter of 0.4 mm.
Specification: Zortrax Inventure 3D Printer
- Automatic bed leveling.
- Filament run-out sensor.
- Closed print chamber.
- Compatible with external filaments.
- HEPA air filter.
- Able to print in two modes.
- Post-processing of parts and functional prototypes would be difficult.
- Shorter print volume.