fbpx

Worldwide

Filter

Showing 1–30 of 108 results

Add to compare
More details +
Affordability
6
Quality
9
Speed
9
Capability
9
Practicality
9
User Expectations
9
PROS:
  • Fab Pro 1000 can produce parts in hours, which other printers take days to produce.
  • The materials that you can print using Fab Pro 1000 are a very wide range.
  • From start to finish the print process is very simple.;3D Sprint, the slicing software of this printer is very helpful and user-friendly when in use.
  • According to the claims made by its company, Fab Pro 1000 produces parts at a 22% lower cost.
  • The post-processing of this printer is very easy.
CONS:
  • Overall operating the printer could be a little bit difficult if the setup hasn’t been done properly.
  • There are reviews available online in which users complain about how complex is Fab Pro 1000 until the first successful printing.
Add to compare
More details +
Affordability
4
Quality
9
Speed
7
Capability
9
Practicality
9
User Expectations
9
PROS:
  • You can produce large components.
  • Quickly switch materials.
  • You can custom your needs.
  • The machine has increased efficiency.
CONS:
  • For those who haven’t used DLP printing technology, the cost of this printer may seem very high.
Add to compare
More details +
Affordability
8
Quality
4
Speed
5
Capability
5
Practicality
6
User Expectations
6
PROS:
  • Overall, the cabling and general appearance of this printer are neat and tidy. There is a drag chain housing that consists of a thermistor, temperature probe, both fans and leveling probe cables, all these things are organized and the only projection from the hot end being the PTFE filament guide tube
  • The Anycubic Chiron brings particular delight with its large build area of 400 x 400 x 450mm
CONS:
  • Notable is the fact that while unwinding this printer there are reports of screw falling out will the tapes that you try to remove to unwrap the printer
  • This printer does not give you the best start, considering the included quality control card has a huge “Pass” stamp
Add to compare
More details +
Affordability
10
Quality
7
Speed
5
Capability
6
Practicality
7
User Expectations
6
PROS:
  • The print quality is amazing
  • Works great with PLA
  • Affordable
  • Great customer support
  • Various upgrades available
CONS:
  • It's difficult to level the bed
  • No automatic leveling
  • No wifi support
Add to compare
More details +
Affordability
9
Quality
8
Speed
7
Capability
8
Practicality
8
User Expectations
8
PROS:
  • Has amazing print quality for the price
  • It is easy to use and set up
CONS:
  • Manual bed leveling can be a hassle
  • The printer has flimsy housing
  • You cannot connect with this printer using any kind of network/internet connectivity
Add to compare
More details +
Affordability
5
Quality
9
Speed
8
Capability
8
Practicality
7
User Expectations
8
PROS:
  • The machine is capable of maintaining powder integrity to ensure optimal part production;
  • It features a 100% increase in power as well as 50% faster build times
  • Withstand higher heat more than 1000 degree Celsius allowing the incorporation of more alloys
  • Allow larger parts 3D printing and more numbers of parts at a time
  • Automating most of the processes that needed manual intervention before and providing optimal quality control
  • Faster speed and takes lesser time for production
  • Increased part printing quality
  • User-friendly and simplified processes introduction for operators
  • Easy to validate and improvement in the uptime
  • Increased efficiency
CONS:
  • Post-processing requirement
  • Not compatible with plastic or polymer or ceramic materials
  • Expensive and huge in size
  • Specific to industrial use
Add to compare
More details +
Affordability
7
Quality
8
Speed
8
Capability
8
Practicality
7
User Expectations
6
PROS:
  • Easy to install
  • Sleek and trendy design
  • Great resolution and accuracy
  • Works with Windows, MAC and Linux OS
CONS:
  • Expensive
  • Occasional software crashes
Add to compare
More details +
Affordability
7
Quality
8
Speed
7
Capability
8
Practicality
7
User Expectations
6
PROS:
  • It possesses dual extruder
  • Multi-color printing is possible
  • Metal frame for extra reliability
  • Removable glass bed
  • Support for multiple filaments
CONS:
  • Build space isn’t very large
  • Unavailability of automatic bed leveling before the printing starts
Add to compare
More details +
Affordability
6
Quality
9
Speed
9
Capability
8
Practicality
8
User Expectations
10
PROS:
  • Overall Witbox 2 is easy to use
  • The print quality of this machine is excellent and the fact mentioned in the Print Quality section is that it has fabulous speed
  • This 3D printer can print using multi-materials
CONS:
  • ou would have to use glue as no heating plate comes with the printer. This increases the overall time that it takes for printing a part after printing one because every time you need to spray the space and apply the glue
Add to compare
More details +
Affordability
2
Quality
7
Speed
9
Capability
8
Practicality
7
User Expectations
6
PROS:
  • t is huge and can manage to print a complete car frame in one go
  • Allows for open source material use
  • Multiple material support
  • Faster than almost every other industrial printer out there offering large model 3D printing
CONS:
  • Very Expensive
  • Not available commercially for purchasing
  • The accuracy and details may feel unsatisfactory to many
Add to compare
More details +
Affordability
3
Quality
9
Speed
9
Capability
9
Practicality
9
User Expectations
9
PROS:
  • Concept Laser XLine 1000R is a very precise SLM 3D printer
  • It is reliable
  • One can create multiple metal parts in a matter of hours.
  • It offers the user a smoother finish and can create complex geometries without any restrictions
  • One of the best Metal 3D printers for industrial use
  • The speed is also faster than most of the SLM 3D printers out there
CONS:
  • The 3D printer is very huge, hence it's not easy to move from one place to another weighing around 8000 kgs. Hence, not suitable for personal use at home. Dedicated to industrial applications only.
  • Moreover, the price is way too high for an individual to afford
Add to compare
More details +
Affordability
7
Quality
8
Speed
9
Capability
8
Practicality
8
User Expectations
6
PROS:
  • Heated bed
  • All metal-design;Sturdy
  • Reliable
  • High print speed
  • High accuracy
  • Plug and play design
  • Affordable
  • Support multiple materials
CONS:
  • Only a USB connection is available
  • Power outage resume feature isn’t available
Add to compare
More details +
Affordability
7
Quality
8
Speed
7
Capability
8
Practicality
7
User Expectations
6
PROS:
  • Large build space
  • Reliability
  • High Accuracy
  • Sturdy Aluminium frame
  • Great Print quality
CONS:
  • It requires a huge space for accommodation
  • Drooping because of Capricorn Bowden Extruder
Add to compare
More details +
Affordability
8
Quality
7
Speed
7
Capability
8
Practicality
7
User Expectations
9
PROS:
  • The printer has a single-point fix in time, easy leveling with auxiliary leveling modes.
  • CR-10S Pro uses an imported blue Teflon tube, with high-temperature resistance that makes the feeding soother and improves the printing quality.
  • The double gear extrusion mechanism of this printer has a large extrusion to make sure that the feeding takes place smoothly.
CONS:
  • The extruder is awkwardly placed.
Best price
Add to compare
More details +
Affordability
9
Quality
7
Speed
7
Capability
8
Practicality
8
User Expectations
7
PROS:
  • The 3D printer is highly affordable
  • With the manual provides, the assembly of the machine is comparatively easy.
  • It comes with a sufficient enough print volume
  • The printer is completely open-source
  • The print quality is admirable; Compact design
CONS:
  • User may find slight difficulty in leveling the bed
  • The machine requires manual calibration
  • The bed may need re-leveling often, increasing the possibility for failed prints
Add to compare
More details +
Affordability
8
Quality
6
Speed
6
Capability
7
Practicality
7
User Expectations
8
PROS:
  • Easy to assemble
  • Provide amazing prints
  • Can print fast without compromising the quality of the prints
  • Removable magnetic build surface
  • Open-source
  • Affordable
CONS:
  • Filament loading may seem difficult
  • Manual print bed leveling
Add to compare
More details +
Affordability
3
Quality
5
Speed
8
Capability
6
Practicality
5
User Expectations
7
PROS:
  • The print speed of this printer is very fast compared to the print speed of other printers in the same price range.
  • It offers high print temperatures because of which printing with materials that do not melt at low temperatures is possible.
  • Delta Wasp 20 40 Turbo 2 is robust and reliable. It won’t vibrate or make a lot of noise during printing.
  • Dual Extruders are optional when printing with this printer.
  • The manufacturer of this printer has given freedom if a user wishes to print using third-Party filament support.
CONS:
  • The price of this printer could seem expensive to the beginners. It is much expensive than the DIY kits
Add to compare
More details +
Affordability
8
Quality
6
Speed
5
Capability
6
Practicality
6
User Expectations
7
PROS:
  • Easy to use
  • Compact and affordable
  • Fully assembled
  • Decent quality prints
  • The easy bed leveling process
CONS:
  • Runs only with Dremel PLA filament
  • Do not provide WIFI connectivity
Add to compare
More details +
Affordability
6
Quality
9
Speed
9
Capability
8
Practicality
8
User Expectations
8
PROS:
  • The printer is easy to set up and use
  • There is an excellent print quality that the printer produces, whether it’s a part of a functional prototype, regardless of the industry you wish to use it in, it will deliver up to the mark
  • The printer sets in front of the world a perfect example of safety and reliability. Often those two are considered counterparts of each other and the printer that has the former lacks the latter. But with Dremel Digilab, the manufacturer has proven that both can be present in almost equal amounts
  • 3D45 has a comprehensive ecosystem that is tailored for education
CONS:
  • Whenever you are printing in this printer using a third-party filament, you’d notice that the print quality is lower than what it was
  • Although it can print with some materials that are advance when you typically turn on to materials like Nylon, the printer starts to show some tantrums
  • The closed system that this printer has limited creativity to an extent
Add to compare
More details +
Affordability
6
Quality
8
Speed
8
Capability
9
Practicality
9
User Expectations
9
PROS:
  • Auto Calibration
  • Moving print bed
  • Accuracy and detailing in minute parts and their edges
CONS:
  • Resin bottles are to be bought from the company
  • The price of the printer makes it look un-affordable to the experimental beginner in the field of 3D printing
Add to compare
More details +
Affordability
4
Quality
8
Speed
8
Capability
8
Practicality
9
User Expectations
8
PROS:
  • The 3D printer is simple to setup
  • You can achieve high-quality print quality 
  • Compatible with a variety of materials
  • Comes with titan extruder
  • It has the glass carbide build plate
  • Enough space for printing
  • Includes necessary accessories to complete the setup and start 3D printing
  • The SD card has the Elegoo Cura
CONS:
  • Bed Leveling isn’t that easy
  • Not assembled
Add to compare
More details +
Affordability
4
Quality
9
Speed
7
Capability
9
Practicality
8
User Expectations
7
PROS:
  • It provides 10 times faster speed than other DLM machines
  • It provides high-resolution printing
  • Plug-and-play technology helps in easy operation
  • The user-friendly interface provided with the screen touch system for ease of setting the printing parameters
  • Compact and can be accommodated in small space as well
  • Reduced need for the support structure
CONS:
  • It is expensive
  • Not accessible for those with low budget
  • Post-processing requirement
Add to compare
More details +
Affordability
5
Quality
7
Speed
7
Capability
9
Practicality
9
User Expectations
9
PROS:
  • Helps to achieve amazing print quality with high strength.
  • Offers a huge range of materials.
  • Supports third party slicing software.
CONS:
  • Post-processing of every part and the functional prototype is required.
Add to compare
More details +
Affordability
4
Quality
8
Speed
9
Capability
9
Practicality
9
User Expectations
9
PROS:
  • Patented quality for 3D printing of parts and functional prototypes.
  • Highest build volume offered.
  • Adjustable print speed.
CONS:
  • The price of the printer would be judged as on the higher end by the users of technology like FDM and SLA.
Add to compare
More details +
Affordability
3
Quality
10
Speed
10
Capability
10
Practicality
10
User Expectations
10
PROS:
  • High-speed process for additive manufacturing.
  • Large available envelope for substantial size parts.
  • No melting characteristics.
  • Bonding of dissimilar metals.
  • Metal matrix composites.
  • Smart or reactive structures.
  • Low-temperature process.
  • Complex internal geometries.
  • Requires no post-processing on parts and functional prototypes.
CONS:
  • Cost is a huge issue with every industrial printer and Fabrisonic Sonic Layer 4000 falls in that range. So no one can help it when users are more concerned about cost than quality and quantitative manufacturing in less time.
Add to compare
More details +
Affordability
5
Quality
8
Speed
8
Capability
8
Practicality
8
User Expectations
8
PROS:
  • Comes with dual extruders
  • You can connect using USB and micro SD cards
  • Allows use of third party filaments
  • It is open-sourced
  • The print bed is completely removable
  • It has a touch screen interface
  • Allows printing with various materials
CONS:
  • Pro 2 has an open body because of which it can be subjected to danger if kids are around
  • The temperature of the atmosphere will affect the overall quality of the print so some complex geometries can not be printed with dimensional accuracy
Add to compare
More details +
Affordability
6
Quality
9
Speed
8
Capability
8
Practicality
8
User Expectations
9
PROS:
  • Comes with swappable print heads.
  • Has a dual extruding system.
  • Parts and prototypes of larger volumes can be printed using Felix Pro 3.
  • Accommodates a touch screen on its top for monitoring and controlling.
  • It comes with multiple options to connect.
CONS:
  • The printer has an open body because of which temperature stability is an issue.
  • The safety of parts, while they are in the printing process, is also an issue.
Add to compare
More details +
Affordability
8
Quality
7
Speed
6
Capability
7
Practicality
8
User Expectations
8
PROS:
  • Third-party filaments are supported in the printer
  • The printer has a user-friendly touchscreen display
  • There’s a filament runout sensor in Adventurer 3 that’s coupled with a resume print feature that allows parts to resume printing exactly from the same point from which they were left off after changing filaments
  • Multiple connectivity options in Adventurer 3 include USB, Wi-Fi, ethernet, and cloud printing
CONS:
  • The build plate can move around too much and sometimes cause the part to fail so it has to be calibrated before printing which takes a lot of time every time!
  • The instruction manual that comes with this printer can be confusing to get through
  • The Wi-Fi connection is known to present some issues while updating the software
Add to compare
More details +
Affordability
7
Quality
6
Speed
7
Capability
8
Practicality
8
User Expectations
8
PROS:
  • Pre-Assembled
  • Decent Print Quality
  • Dual Extruder
  • Affordable
  • Heated Bed
CONS:
  • No Auto Calibration
  • A Bit Noisy
Add to compare
More details +
Affordability
8
Quality
7
Speed
7
Capability
8
Practicality
8
User Expectations
7
PROS:
  • Removable build plate
  • Quiet operation
  • Simple and impressive design
  • User-friendly touchscreen interface
  • Very Reliable
  • Overhead light for enhancing the visibility of prints
CONS:
  • Tiny build space
  • Non-heated print bed
  • Lack of auto-leveling feature
  • Only supports PLA
  • Tricky when working with support structures
Pick 3D Printer
Logo
Compare items
  • 3D Printers (0)
  • 3D Scanners (0)
Compare